Re: Double ethernet interfaces problem

Hi:

The problem was that i had the same logical network in both eth, i posted here
because this is used for a firewall. i just changed eth0 to 192.168.0.100 and
eth1 to 192.168.1.100 and everything worked perfectly

Thanks
Rodrigo

On Thu, 6 Oct 2005 12:15:16 +0200, Wojciech Ziniewicz wrote
> 2005/10/6, Rodrigo Haces <rodrigo@haces.com.mx>:
> > Hi, i just installed debian sarge 3.1 on my pc, i have 2 ethernet interfaces,
> > eth0 and eth1, im going to configure a firewall with this, but by now im just
> > testing, but i have the next problem
> >
> > my eth0 and main interface has the ip 192.168.0.100
> > my eth1 has by the testing period the ip 192.168.0.99.
> >
> > both eth are connected to the same switch with the same local network, my eth0
> > is on all the time, so it works fine, but when i bring up th eth1 i cant bring
> > it down anymore, i do ifdown eth0 and ping 192.168.0.99 and can still connect
> > to this ip with ssh, ping, etc. if then i ifdown eth0 both ips die.
>
> the problem lies in corrupted/buggy modules or ethernet card.
>
> modprobe -r your_eth_module should down it completely and erase from
> ifconfig -a .
>
> --
> Pozdrawiam,
> Wojciech Ziniewicz | wojciech.ziniewicz@gmail.com
> Powered by google.com | [wanna gmail?]

--
To UNSUBSCRIBE, email to debian-firewall-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org